Buyer guide
Forklift Aisle Width: Keep the Reference Pallet with the Ast Figure
A forklift data sheet gives a turning radius smaller than the warehouse aisle. That comparison does not establish that the truck can turn with a pallet and place it into the rack. The purchasing file needs the working aisle requirement for the intended load, together with the assumptions behind that figure.
Read the dimension that answers the task
Toyota Material Handling Europe describes Ast as the minimum straight-aisle width in which a truck carrying a given load can turn through 90 degrees. Its guide identifies turning radius, load dimensions, load distance and clearance among the inputs. Turning radius Wa is therefore one input, rather than a substitute for the loaded manoeuvre requirement.
Keep the pallet dimensions and orientation beside Ast in the comparison sheet. Do not copy the smallest aisle figure from a brochure without its row heading. Ask the bidder which configuration and load were used, what clearance is included, and whether the answer covers the attachment in the actual offer.
Reference: Toyota Material Handling Europe: aisle width guide
Check the reference against the load that will arrive
Linde's EG25–EG35 data sheet illustrates the distinction by listing aisle requirements for 1000 × 1200 pallets crossways and 800 × 1200 pallets along the forks separately from Wa. These are manufacturer figures for the listed equipment and conditions, not a universal warehouse design rule.
An order may use a standard pallet while the wrapped product projects beyond it. Give the supplier the finished load envelope, orientation and relevant drawings. If the load changes, reopen the assessment. The warehouse reviewer should provide the clear space available at the actual rack face, including obstructions and pallet overhang, rather than only a nominal building-layout dimension.
Reference: Linde: EG25–EG35 technical data and dimensional footnotes
Turn an indicative fit into an approved purchasing record
For a hypothetical comparison, two trucks may show the same turning radius while their quoted aisle requirements refer to different pallets. Mark that comparison unresolved until both suppliers answer for the same load. Do not assume that subtracting the turning radius from the aisle width produces a usable safety margin.
Before ordering, retain the proposed configuration, load drawing, supplier assessment and approval by the responsible site reviewer. Any demonstration should use an agreed safe procedure and acceptance criteria. Send Zenith Eclipse the equipment requirement, load envelope, rack arrangement, quantity and destination at sales@zenitheclipse.com. Machinery is sourced and supplied against the agreed brief; cited manufacturers are technical examples, not claims of representation or stock.
Discuss your requirements
Send an equipment enquiry
sales@zenitheclipse.com